Equipment |
|
---|---|
Blade Spindles | No maintenance, sealed and non-greasable spindles; 5.50″-diameter cutter housing with 0.67″-diameter spindle shaft. |
Drive Tires | 18 x 7.5-8, 4-ply Turf Tech® |
Cup Holder | Standard |
Tractor Frame | Unibody, Riveted 10 ga. Steel |
Steering Control | Steering wheel controls direction of front casters and independent hydraulic transaxles in a turn for maximum control. Steering column is adjustable to operator preference. |
Front Caster Tires | 11 x 4-5 ribbed tread, pneumatic |
Parking Brake | Automatic-actuated pawl brake. |
Seat | Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position. |
Electrical | 12-volt battery with 15-amp alternator. |
Power Components |
|
---|---|
Engine Brand | Exmark |
Engine Model | 708 |
Engine Displacement | 708 |
Engine Series | V-Twin |
Engine Type | Carbureted |
Engine Speed | 3,300 rpm |
Air Filter | Standard Engine Manufacturer’s air filter |
Fuel Type | Gas Carbureted |
Fuel Capacity | High-capacity, 2.9-gallon (11.0-L), single fuel tank with single fill location. |
Fuel Indicator | Translucent Visual |
Drive | Hydro-Drive |
Drive Description | Two Hydro Gear ZT2200 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. |
Speed | Infinitely variable speed selection from 0–7 mph (11.3 km/h) forward. 0–3.4 mph (5.5 km/h) reverse. |
Carb Compliant | No |
Deck Lift | Standard; lever lift. Foot-assist lifts the deck to maneuver around obstacles. |
Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
ROPS | None |
PTO Engagement | MagStop electromagnetic 105-ft-lbs clutch |
Drive Wheel Release | Allows unit movement without engine running. |
Casters | .25″ thick caster yoke arms |
Decks |
|
---|---|
Width / Cutting Deck | 50″ |
Deck Style | Floating Deck |
Deck Style Description | Exmark Series-2 fabricated and welded steel deck. Side discharge standard with the option to bag or mulch. |
Deck Construction | 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. |
Blade Tip Speed | Approximately 18,500 fpm. |
Cutting Heights | 1.5″ (3.8 cm) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments, adjustable from operator seat with standard foot operated assist. |
Blades | 3 Blades at 17.50″ Length |
Dimensions |
|
---|---|
Width | 61.7 (156.7 cm) |
Length | 81.7 in. (207.5 cm) |
Height | 42.9 in. (109.0 cm) |