Equipment |
|
|---|---|
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 30mm (1.18″) diameter spindle shaft and splined blade driver. |
| Drive Tires | 24 x 12.0-12, 4-ply Turf Master® |
| Cup Holder | Standard |
| Tractor Frame | Unibody, welded, heavy-duty 1.5″ x 3″ tubular steel. |
| Steering Control | Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
| Front Caster Tires | 13 x 6.5-6 smooth tread, semi-pneumatic tires. |
| Parking Brake | Lever-actuated disc brake. |
| Seat | Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
| Electrical | 12-volt battery with 25-amp alternator. |
Power Components |
|
|---|---|
| Engine Brand | Kohler® |
| Engine Model | ECV980 |
| Engine Displacement | 999 |
| Engine Series | Command™ EFI |
| Engine Type | Electronic Fuel Injected |
| Engine Speed | 3,650 rpm |
| Air Filter | Heavy-duty canister air filtration system |
| Fuel Type | Gas EFI |
| Fuel Capacity | 12-gallon (45.4-L), single fuel tank with single fill location. |
| Fuel Indicator | Yes – electronic Sender |
| Drive | Hydro-Drive |
| Drive Description | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors. |
| Speed | Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| PTO Engagement | MagStop Electromagnetic 250-ft-lbs clutch with spot brake |
| Drive Wheel Release | Allows unit movement without engine running. |
| Casters | .50″ thick caster yoke arms. |
Decks |
|
|---|---|
| Width / Cutting Deck | 72″ |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch. |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments adjustable from operator’s seat. |
| Blades | 3 Blades at 24.50″ Length |
Dimensions |
|
|---|---|
| Width | 84.9 in. (215.6 cm) |
| Length | 86.1 in. (218.7 cm) |
| Height | 70 in. (177.8 cm) |
| Curb Weight | 1276 |
